Before choosing a class III laser, the most important thing to know is if the condition is acute or chronic. This will determine if an inhibiting laser or a non-inhibiting laser is what I would recommend. Class III Lasers can have either an analgesic effect or an inhibiting effect. Try to get a free trial so you can experience both effects.
While class 4 lasers dominate the commercial cold laser market, with the exception of FDA certified class 3 lasers that were actually approved for reasons other than a heating blanket, class 3 lasers are a breed of lasers that do not require a trained technician because they will not burn you if you keep it in one place.
Most class 4 lasers work at class 3 settings after "optic reduction" (this is the way it was thought to me). Many companies say that their class 3 lasers is just as effective as the deep penetrating class 4 lasers. These are class 3 lasers that have 100 or 200 watt probes. Most of the lasers have 25 to 50 watt probes and many of the residential companies use the research from 200 watt probes used in research studies. If you want to know if a 25 watt, a 50 watt, or a 200 watt probe will work best for you, FIND OUT WHAT THAT PARTICULAR LASERS RESULTS WERE BASES ON and not general research using the most powerful class 3 laser. I have seen companies selling a 3,000 dollar laser talking the same jargon as the 20,000 dollar class 3 lasers. A real Class IV runs at Class IV settings, not geared down to Class III power (output power after input power and peak power reduction). Don't overpay for a Class IV laser unless you know it is running its not running on PWP (phony watt power)
Most of the cheap lasers get returned anyway and when people ask for refunds, they get them because the lasers are so cheap to make that the ones that do sell make up for it. I have found that certain companies always seem to have demos and slightly used lasers. Do you see any high end companies selling used lasers? The good lasers rarely get returned while some brands are known for returns.
It is worth spending the extra money on a laser if you actually need a more powerful laser or you simply need to get the session done quicker. Those are the only 2 reasons why I would spend the extra money. Most people can get away with a 2,000 laser if they have an extra 40 minutes to 2 hours to spend a week using their laser.
My prerequisites for selling Class III Lasers
FDA Approved (Not Exempting models approved for Heating Pads)
Penetration of at least 5 cm without having to press the blood out of the way
Must be CE Certified
Must have true independent research that I can contact
Manufacturers must point to their OWN RESEARCH, not general bell curved generic studies
Must be able to switch from LED to Laser w/o having both on at the same time as only option.
Must work with scalar energy stickers or shells that can be programmed
Must have "documented" testimonials, not just by telling you over the phone. HUGE SCAM
Must be currently in at least 75 veterinarian clinics
Company must already be around 5 years or longer
Must be currently in at least 100 chiropractic clinics
Must be sold to at least 1,000 residential users
Must state the level of penetration it has (ex: 30 mw of power is low, usually
penetrates a sore knee or elbow
Must have at least a 5 year warranty (plastic models usually don't)
Must have separate laser and LED settings. Never good to use them both at same time.
If the laser is a LED combo, the LEDs must be strong enough move cox2 and create
ATP, the chemical needed for healing
CONSUMER BEWARE: THERE ARE OTHER LASES CLAIMING THEY PENETRATE 5 cm.
Yes, they do but watch out for the scam!!!!!!!
Going to 5 cm with a cheaper laser diode VS a diode that goes 5cm is the scam.
Some companies make the claim after they do a trick to justify their claims on their website to trick you into thinking their laser penetrates deeper. Here is the scam: (and many veterinarians have told me about this scam, "especially with animals with thick skins") Many of the companies that say their laser goes to 5 cm actually does but it doesn't. This was proven with animals with thick furs at first and now cold laser companies are selling lasers that claim to go this far to doctors.
Even doctors with medical degrees are not immune to the scams from highly skilled marketeers. What is done is they scammer marketeers selling those lasers need to press the laser diode onto the skin with enough force to move the blood to the sides of the tissue (because blood absorbs light and weakens the beam of light). When you press really hard into your skin when you are sunburned you can see briefly a white mark that disappears in a few seconds.
That is what they are doing. They jack the probe so hard against the skin and to remove the blood away and then claim it goes to 5 cm when it actually doesn't without doing this to the skin. When tissue is 5cm deep, the only way a cheap laser can get to it is by moving the blood (hemoglobin absorbs most of the light in the cheaper lasers which is why most people buy lasers and return them because they didn't work right). Also, if the person has a darker pigmentation, and someone wants to go 5 cm deep this can effect it.
A quality class III cold laser should go 5cm with almost every type of pigmentation and without jamming it into the skin. Also. many companies say their laser will go 5 cm and do those tests on obese people. If you studied lasers, you would know that fat tissue is more transparent than muscle and blood. Get a piece of fat from the butcher and a piece of meat and do a test yourself to prove it. Also, clothes can stop about 80 to 100% of most lasers depending on the thickness and actual color of the clothes. An infused laser is one of the few laser that can penetrate clothes because if just 1% gets through, it works.
Most laser that do go 5cm deep are just speckled light that is so light that it is basically just scattered in the tissue being shined. The light is not intense as you might think and not coherent. It's more like a laser speckles.
A good laser is a laser that penetrates at the top at about 5 cm and spreads out about half that. The next deepest penetrating laser is at 632 nm. A 830 nm laser with 3 gallium aluminum arsenide diodes is very strong. There are different gasses that go in different lasers. The most expensive to produce is this gas.
Some class III lasers have LED mixed with Lasers. For surface issues, the LED is fine. If you just hurt your finger or broke your toe, LEDs can be good because you don't need anything to go 5 cm when your toe is less than 5 cm. Bone on bone problems under the muscles and skin usually need this level. If you are just using it for your finger, it would be over kill to buy a more powerful laser. Only buy a deep penetrating laser if you need more depth.
This is a huge scam in the industry that is absolutely ridiculous. I have personally went to health expos where dealers use a laser on people walking up to their booth and shine the laser on them in a counter clockwise circle. Then they use the "laser they are trying to sell" in a clockwise motion. (I HAVE VIDEOS SHOWING THE SAME LASER CLOCKWISE AND COUNTER CLOCKWISE. One motion takes energy away and one puts energy in. On the lasers I have used, just holding it over the person versus moving it clockwise makes a night and day difference. I am sick of people trying to scam people by failing to use the laser how it should be used. By using perfect clockwise circles it can speed up sessions but not good for doctors since that means less return patients.
FDA approved scams: Make sure your laser has a certificate number or you might be getting a laser that is not FDA approved which is illegal to sell. NON FDA approved lasers are legal to sell but if you say its approved and it's not that is a crime.
Another thing I don't like about Class III lasers. Some claim they have deep penetration. Well, who wants to have to press the damn laser to the skin so hard that it moves the blood out of the way. Your hand gets freakin tired after a few minutes of pressing. I get complaints even from the assistants that work in chiropractic offices and they complain to me asking if pressing the laser is really necessary and tell me how they don't like doing this. A good laser should work without having to use pressure into the tissue.
There are newer lasers coming out with divergent beams. These are beams that come out in three dimension. This is the opposite of the a collimation laser that gives little to no divergence at all, just a straight laser beam. Exposure time with divergent beams can lower the irradiation time used on the tissues being treated. I am also starting to see lasers with two or more different laser beam colors. Green and violet lasers combined with red are very interesting too.
Pain is what signals most people to buy a cold laser. Their cells are injured or stressed and they are not consuming the oxygen like normal cells. Painful cells are typically full of nitric oxide which interfere with the production of ATP by the mitochondria that are deprived of oxygen. Usually these areas on the body are inflamed and are not producing ATP like they should. The laser that is most helpful can very quickly get rid of this nitric oxide and the inflammation is significantly reduced and the healing process starts and the tissues start becoming stronger and the pain can start to fade. People are spending thousands of dollars to start this process with tissues that are having a very hard time getting the process started on its own.
Class III Lasers Price Ranges
Under $2,000 dollar models
The lasers in the under $2,000 range do work. I will not say they don't work but differently is the way I can describe it based on the ones I have tried and feedback from users. First, these take longer to inhibit pain and reduce inflammation. Do not get confused over the cheaper ones having a lot of power thinking they are like the expensive ones. The parameters and narrowed wavelengths might not be like the more expensive ones but they still work. There is a range between near infrared and far infrared light. With the right gasses in different wavelengths to create the parameters and the field of infrared can make the difference. It might not be important if someone just wants to get rid of pain but some typically don't have as much lasting effects as the better ones. You might have to use these lasers more often and more times per day but then again, you don't pay as much. The spectrum might lean more toward the near infrared on some beams and more toward the far-infrared beams. Where in this range your laser emits can help determine this. The right parameter of the beam can either accelerate or inhibit. One activates the mitochondria and produces ATP and others don't. Just because it is a cold laser doesn't mean it can work. This is why some of the arguments I hear from competing manufactures say another company's laser won't work. Yes, it can be just that for your situation but for another person who does not want to inhibit, that laser might just well be the perfect laser for them. Please, if you are looking to get a laser, make sure you know if you need an inhibiting laser or a non-inhibiting laser. Half the people seem to be looking in the wrong direction just by the odds of their condition. For those that really can't afford a high powered laser, many people are putting stickers on the tips of these lasers to make the cells being treated more sensitive to the light being emitted by that laser. The sticker's biofield is picked up and acts similar to an amplifier to increase the energy of the beam.
$2,000 to $4,000 medium powered
These lasers usually have a narrowed wavelength in the near to far infrared light range. These usually are more powerful than the smaller lasers and usually are the inhibiting lasers. These typically are sold to treat on areas of pain. These typically are the ones that most residential users buy. I wouldn't say the ones in this price range are powerful enough to go very deep to treat the nerves in the back going toward the pain area but do have a purpose. These typically take quicker times to inhibit than the very low powered lasers. The lasers that inflate their power this category seem to have very high ratings but weaken after the beam is actually delivered. See my article on peak wattage and input wattage to be more informed on this topic.
$4000, to $6,000+ high powered
This is when you get a bump up in milliwatt power from the cheaper Class III lasers to these. The lasers in this category might have some of the high power of the next category in price range but may or may not have the parameters of that range. Or, they might have the parameters but lesser power which can give the same results but take quite a bit longer. The lasers in this range usually are bought residentially for those who want the parameters of the higher end Class III lasers. In this range look for laser that are closer to the near infrared range. The gasses in the optics in the near infrared range are red and this is the wavelength that can help increase the rate of ATP and stimulate the mitochondria. In this light range, the cells get help becoming oxygenated and help start the healing process. Again, I find it very helpful to increase the voltage that the beam can help transfer by adding one of the stickers. Some stickers can be too strong and can cause too much inflammation. The strongest stickers are good in crisis situation such as when peoples' hands and feet are numb or there is restricted blood flow. Some work as fast as you can see the part you are shining turn red from increased blood flow in under a minute. I have found many lasers in the $5,000 to $6,000 range that are just inflated and are no different than the ones in the $2,000 to $4,000 range. There are some tests you can do to see the real worth and value of lasers which my site can help you figure out.
$6,000 to $10,000 High powered, peak wavelength
The analgesic effect lasts longer even at shorter session times. The types of wavelengths from higher end Class III laser probes in the 6 to 10 thousand dollar range should increase ATP and cellular metabolism much faster a the probes to get this wavelength requires extra expenses to get this exact delivery. These wavelengths are the most anti-inflammatory and these probes usually are at least 1000 mw probes and can go up to 400 mw. The 400 mw probes or even the 200 watt probes are overkill as you are only talking maybe an extra savings of 15 seconds per treatment area but in a high traffic clinic these seconds can add up if there are a lot of people waiting to get treatment. For crisis situations where there is throbbing pain or the pain is intolerable, I would recommend the lasers in this class. Again, the cheaper lasers can work if they have the right protocols but usually don't work as quick as the lasers in this category.
There are lasers in this range that have inflated prices and those that are fairly priced. To know you aren't getting scammed, make sure you know the correct wavelengths or the protocols you are treating in your clinic and you will know if you are getting a high end laser that its light will actually be absorbed by the body (cytochrome c oxidase, to be exact) to rid the nitric oxide levels in the "tissues" so ATP can start the production more efficiently. Cellular activity can be increased in the lasers in this category, including healing times and the deepest pains. These lasers typically have a very narrowed range, usually 660 to 680 nm and very high powered.
Remember, there are 2 types of uses for Class III lasers that I have found.
The first is for people that want to reduce inflammation and get the analgesic effects by simply blocking the pain receptors. Things that disrupts the cellular process and have a blocking effect can stop the healing process and may act simply as a "Bandaid" until the healing process is underway. (Note: most high end lasers are equipped with different types of LEDs that do the opposite of the laser and "cause" inflammation to the area. The pain blocking is only temporary. I would never try to inhibit the actual pain area by shining the laser where it hurts. Many people that call me have knee pain and they are shining the laser right on their knees. Most of the clinics do not do this but people who buy them on the internet without any education just shine it on their knee like an idiot who thinks they know it all and want to bypass the chiropractor or doctor who has a high end laser in their clinic. Many people get laser treatments more than they need to because they are using lasers with the wrong parameters and worse, wrong protocols. inhibiting when they could be using non-inhibiting)
A quality Class III laser is strong enough to allow light to reach the target area. Not just strong enough to reach the target area but be strong enough to give the strength of light after being absorbed by the layers of skin. The goal is to let the cells absorb the light energy to stimulate the damaged cells and tissues. The reason most people return lasers is that their is no reduction in pain because the lasers aren't powerful enough after going through the skin layers and blood.
If the strength is low, it can take several minutes to reach the same effects as a strong one used for 30 seconds. You will have to choose between stronger doses and longer times. Longer times usually mean a cheaper laser. Just because a laser can penetrate 5cm below the skin's surface doesn't mean it will after passing through the skin layers on some people.
Another thing to know before buying a cold laser is knowing if the pain is acute or chronic. Usually chronic conditions call for different types of lasers than those for acute conditions. Many people have pain that is not from tissue damage but from lack of exercise and other de-conditioning lifestyles that degenerate the body. Most people are in pain that do not have injuries that contact me about cold lasers. Simply raising their charge to the -70 to -90mV levels can make a huge difference. The pain from these people is the symptom of low charged body rather than a symptom of being injured.
I have spent a lot of time dissecting Class III lasers. Some are inhibiting and some are just the opposite, non-inhibiting. Some are not powerful enough to go deep while others are fine just for treating surface issues. The reason most people return lasers is because they don't have the right parameters for what they are treating or they take too long to work. If you are looking to get a Class III laser, you may ask me any questions pertaining to your needs.
Results may vary from person to person based on the imbalance. Some or all information on this website has not been evaluated by the FDA and is not intended to treat disease, support human life, or to prevent impairment of human health; for frequency, self-education and research purposes only. Please seek professional help with health issues.
Note: I will never try to convince anyone that a class 3 laser or a class 4 laser is better. Both types sell equally. Many times a class 3 laser is more suitable. Call me and I will discuss the differences and talk with no BS. Real laser reviews. No sales hype.